Model 438 Rebuild Kits & Spare Parts
FOR USE WITH PROMEC MODEL 438A, B, C & D HYDRAULIC SWAGING MACHINES
438 Type A Rebuild Kit – Back End Basic Refresher Kit
438 Type B Rebuild Kit – Back End Complete Refresher Kit
438 Type C Rebuild Kit – Front End Pivot Rebuild Kit
438 Type D Rebuild Kit – Front End Die Area Rebuild Kit
Spare Parts – Contact Us for Specific Part Info
Rebuild Kits
| 438 TYPE A REBUILD KIT – BACK END BASIC REFRESHER KIT PRICE: $107 + $15 Shipping & Handling |
||
| The Model 438 Type A Rebuild Kit is intended as a basic refresher kit for the back end of the machine. It contains replacement parts for all of the sleeve bearings and thrust washers for the back end of the machine, including the hydraulic cylinder pin sleeve. In PROMEC’s experience, the Type A Rebuild Kit is appropriate for general preventive maintenance efforts and should be considered for the Model 438 after approximately three years of average use. | ||
| The Type A Kit includes all of that parts listed below: | ||
| QTY | P/N | DESCRIPTION |
| 8 | 01-558901-11 | SLEEVE BEARING 3/4″ X 3/8″ LG |
| 1 | 01-558901-12 | SLEEVE BEARING 3/4″ X 1″ LG |
| 2 | 01-558901-17 | SLEEVE BEARING 3/4″ X 3/4″ LG |
| 8 | 01-558901-15 | THRUST WASHER 3/4″ BORE |
PRICE: $107 + $15 Shipping & Handling
| 438 TYPE B REBUILD KIT – BACK END COMPLETE REFRESHER KIT PRICE: $688 + $25 Shipping & Handling |
||
| The Model 438 Type B Rebuild Kit is intended as a complete refresher kit for the back end of the machine. It contains all of the parts included in the Type A Kit, replacement parts for all of the shafts and toggles on the back end of the machine and the hydraulic cylinder clevis. In PROMEC’s experience, the Type B Rebuild Kit is appropriately applied when performance issues related to general wear and tear have arisen and should be considered for the Model 438 after approximately five years of average use. | ||
| The Type B Kit includes all of the parts that make up the Type A Kit, as described above, as well as the parts listed below: | ||
| QTY | P/N | DESCRIPTION |
| 2 | 01-558901-6 | SHIM WASHER |
| 3 | 01-558901-7 | SHIM WASHER |
| 1 | 01-558901-8 | SHOULDER SCREW/PIVOT SHAFT |
| 2 | 01-558901-9 | SHOULDER SCREW/PIVOT SHAFT |
| 3 | 01-558901-10 | HEAVY HEX NUT, NYLON INSERT |
| 4 | 01-558901-03 | TOGGLE PLATE |
| 1 | 01-558901-04 | ALTERED CLEVIS/FEMALE EYE |
| 1 | 01-558901-33 | 1/4-20 SOCKET SET SCREW |
PRICE: $688 + $25 Shipping & Handling
| 438 TYPE C REBUILD KIT – FRONT END PIVOT REBUILD KIT PRICE: $167 + $15 Shipping & Handling |
||
| The Model 438 Type C Rebuild Kit is a complete rebuild kit for the front end pivot of the machine. Before utilizing the Type C Rebuild kit, PROMEC recommends first applying the Type B Rebuild Kit as it will generally solve most performance issues related to normal wear and tear. In PROMEC’s experience, the Type C Rebuild Kit should be considered for machines that have experienced considerable wear and tear and/or are showing significant performance issues. | ||
| The Type C Kit includes all of the parts listed below | ||
| QTY | P/N | DESCRIPTION |
| 2 | 01-558901-13 | SLEEVE BEARING 1 3/8″ X 1″ LG |
| 1 | 01-558901-14 | SLEEVE BEARING 1 3/8″ X 1 3/4″ LG |
| 2 | 01-558901-16 | THRUST WASHER 1 3/8″ BORE |
| 1 | 01-558901-05 | MAIN PIVOT SHAFT |
| 2 | 01-558901-18 | SHAFT COLLAR 1 3/8″ BORE |
PRICE: $167 + $15 Shipping & Handling
| 438 TYPE D REBUILD KIT – FRONT END DIE AREA REBUILD KIT PRICE: $525 + $20 Shipping & Handling |
||
| The Model 438 Type D is a complete rebuild kit for the front end die holding parts, including the upper and lower die plates with the tapped and fixed jaws and all of the necessary hardware. In PROMEC’s experience, the Type D Rebuild Kit is appropriate when a machine is experiencing performance issues affecting the quality of the after-swage dimension. Generally, a visual inspection for wear of the die holding components will suggest if this kit is required. | ||
| The Type D Kit includes all of the parts listed below | ||
| QTY | P/N | DESCRIPTION |
| 1 | 01-558901-24 | UPPER DIE HOLDER |
| 1 | 01-558901-25 | LOWER DIE HOLDER |
| 4 | 01-558901-32 | 3/8-24 SOCKET SET SCREW |
| 3 | 01-558901-31 | 5/16-18 X 1 1″ LG SOC HEAD CAP SCREW |
PRICE: $525 + $20 Shipping & Handling
Spare Parts
PROMEC maintains stocks of all of the most commonly requested spare parts for each type of machine we manufacture, allowing us to quickly get you the part you need to keep your business up and running. If one of PROMEC’s rebuild kits shown above doesn’t work for you, contact us at sales@uspromec.com or at (860) 450-1139. We can pinpoint the part that you need, quote you a price and get it shipped to you quickly to keep your PROMEC machine producing.